Call Us: (303) 495-2320

PCIe/NVMe Products


Part #: QTL2087
Description: GEN4 PCIe x16 Card Module +Triggering (REV1)
Minimum Quantity: 1
Price (1-3): $3,600.00
Price (4+): $3,150.00
For Volume Corporate Pricing, Call 303-495-2320


Drive Control Modules

The Torridon PCIe SFF HS Drive Control Module allows remote switching of power, drive presence, PCIe data pins, and sideband signals to a PCIe SFF Disk Drive whilst plugged into a host system. Any standard drive compatible with the SFF-8639 can be controlled. Each set of pins can be individually switched, allowing complete control over the power up sequence of a drive. The switches can be sequenced at precise timings to simulate a hot-swap event, including pin bounce. Individual pins can be broken or glitched at any time to simulate a fault in the system. The Control module switches the high speed PCIe data lines at speeds up to Gen 3 (8GT/s). This greatly increases the number of faults that can be injected into the system and produces a more comprehensive hot-swap. Quarch modules may be customized to support other proprietary signals on request.

PCIe Gen3 Card Breakers

The Torridon PCIe x16 Gen 3 Control module allows remote switching of PCIe data, power and supporting control pins in a PCIe x16 Gen 3 slot for test automation or fault injection purposes. The module supports PCIe Gen 2 and Gen 3 devices at data rates up to 8 GT/s. Each pin is individually switched, allowing complete control over the mating of the card connector. Any individual pin(s) can be disconnected or glitched to simulate failures or configuration changes. If the devices support hot-swap, a sequenced hot-swap event can be run, connecting pins in sequence and simulating pin-bounce if required. WARNING: Some systems DO NOT support hot-swap of a PCIe card while the system is powered up. You should verify that your hardware supports this feature before using it. The module can disrupt power, data and control signals down to a minimum glitch length of 50nS. QTL1630-02A provides a power injection port to optionally power the PCIe add-in card from an external Quarch Programmable Power Module (QTL1455) instead of the PCIe host.