Call Us: (303) 495-2320

Programmable Power Modules


 

This module can perform full power margining from 0V to Nominal +20%, with complex voltage ramps, glitches and more. Dual Output channels (12V and either 3V3 or 5V) allow you to power most common devices.

250KHz sampling allows capture of accurate Voltage, Current and Power data. Replace your bench power supplies, scope and current probes with this powerful and cost effective alternative.

XLC Programmable Power Module

This module can perform full power margining from 0V to Nominal +20%, with complex voltage ramps, glitches and more.

250KHz sampling allows capture of accurate Voltage, Current and Power data. Replace your bench power supplies, scope and current probes with this powerful and cost effective alternative.

The XLC module can perform accurate current measurement at below 100uA, and has 8Mbit of memory buffer. A mode switch allows use with both 5V SAS and 3V3 PCIe devices.

HD Programmable Power Module

This module can perform full power margining from 0V to nominal +20%, with complex voltage ramps, glitches and more.

250KHz sampling allows capture of accurate voltage, current and power data. Replace your bench power supplies, scope and current probes with this powerful and cost-effective alternative.

The HD module can perform accurate current measurement at the same 100uA level as the XLC, has eight times the memory buffer and faster streaming modes.

The modules also support advanced fixtures and LAN control.

Multi-Device Power Testing

Quarch’s latest power module, the HD Programmable Power Module, is a fully programmable power supply and measurement tool for drive power testing.

The HD PPM supports remote control via LAN and a range of advanced power injection fixtures. The new module extends the features of the XLC, with larger recording RAM (eight times the memory depth of the XLC, at 64Mbits) and faster streaming modes. The HD board is also significantly smaller, allowing six modules to fit in a 1U rack mount.

You can use the multi-port, rack-mounted HD PPM to test multiple drives in a large test rack, instead of laboriously bench-testing one drive at a time. In addition, the HD PPM allows you to automate a wider range of tests and integrate power testing into existing test racks.

 
For Volume Corporate Pricing, Call 303-495-2320
Part # Description Wiring Diag. Drawings Avail. Min. Qty. Price  
QTL1455 Torridon Programmable Power Module. Supports Torridon and USB con ... 30 Days 1 $2,620.00
 
QTL1617 60cm Power Module to ATX Cable 30 Days 1 $42.00
 
QTL1658 12V and 5V Power Margining Module w. Triggering 20 Days 1 $3,145.00
 
QTL1697 60cm Power Module to PCIe Card Module cable 30 Days 1 $42.00
 
QTL1727 12V and 3.3V Power Margining Module w. Triggering 30 Days 1 $3,085.00
 
QTL1730 12V and 3.3V Power Margining Module 30 Days 1 $2,570.00
 
QTL1771 60cm Power Module to Injection Fixture cable 30 Days 1 $42.00
 
QTL1824 XLC 12V and 5V Power Margining Module w. Triggering 30 Days 1 $4,115.00
 
QTL1847 XLC 12V and 5V Power Margining Module 30 Days 1 $3,600.00
 
QTL1981 60cm Power Module to HD Fixture cable 30 Days 1 $42.00
 
QTL1995 HD Programmable Power Module X6 Unit + Triggering 30 Days 1 Call  
 
QTL1999 HD Programmable Power Module + Triggering 30 Days 1 Call  
For Volume Corporate Pricing, Call 303-495-2320