Programmable Power Modules (PPM)
Available in a single DUT bench-top version as well as a rack-mount version capable of margining up to 6 DUTs.
Flexible power margining and measurement 12V and 5V (switchable to 3V3) outputs and is ideal for SAS, SATA and PCIe based devices. The outputs can be set automatically when used with advanced Quarch fixtures.
Each rail can be programmed from 0 to 120% of its nominal voltage. The voltage and current of each output can be simultaneously recorded to provide accurate power consumption measurement.
The module allows programming of arbitrary voltage output waveforms which can be used to simulate power-up ramps, power failures, noisy power sources and much more. Patterns can be created over a range of microseconds to minutes, allowing a wide range of testing options.
A high-speed record feature provides an oscilloscope-like function to record the output voltage, current and power consumption of the attached device.
A range of injection fixtures allow the module to inject power into a variety of devices.
- Dual output
- Programmable output waveforms
- Flexible power margining
- High-speed measurement and recording
- Easy measurement of voltage, current and power
- Simultaneous sampling of voltage and current on both outputs
- Accurate power consumption measurement
- External triggering option available
- Simple test automation from any standard scripting language
- Supports advanced power injection fixtures.
Power Analysis Module (PAM)
Additional Fixtures for Instrumentation:
PCIe Gen3, Gen4, Gen5
Form Factors: U.2, U.3, EDSFF x4/x8 E1/E3, M.2, AIC
A revolutionary and accurate way to analyze power and control in a specific environment, the Power Analysis Module (PAM) shows you the real-world interaction between your host system and the device under test.
Supporting a wider range of devices and measuring a greater number of rails than ever before. The PAM operates in a real-world environment, measuring the power supplied from your host system to the device under test. Through its plug-and-play interposer, it offers a true and accurate measurement of the entire system interaction.
- Measure Voltage/Current/Power on 12v and 3v3/5v rails
- Monitor multiple critical sideband lines including PERST and CLKREQ
- 250KHz base sampling rate
- Monitor multiple critical sideband lines including PERST and CLKREQ
- 250KHz base sampling rate
